Back to Blog
Soap Making Basics8 November 2026· 8 min read

12 Best Oils for Soap Making and What Each One Does

Olive, coconut, palm, castor, shea, cocoa butter, lard, tallow, sweet almond, avocado, rice bran and babassu: what each oil brings to a soap bar, typical amounts, and their NaOH SAP values.

Every oil brings something different to a bar: hardness, lather, mildness or conditioning. Good recipes balance a few of them. Here are the twelve most useful soap making oils, with what they do, a common starting range, and the NaOH SAP value from our SAP chart.

Quick answer

  • For hardness: coconut, palm, cocoa butter, lard, tallow, babassu
  • For big bubbly lather: coconut and babassu, boosted by castor
  • For mildness and conditioning: olive, shea, sweet almond, avocado, rice bran
  • A classic beginner balance: olive, coconut, a hard fat or butter, and a little castor

1. Olive Oil (NaOH SAP 0.135)

Mild and conditioning, the backbone of many recipes. Slow to trace and needs a longer cure. Common range: 25% to 100% (100% olive is castile soap).

2. Coconut Oil 76° (NaOH SAP 0.183)

Makes a hard bar with big, bubbly lather and strong cleansing. Above about 30% it can feel drying, unless you raise the superfat (salt bars often use far more coconut with a high superfat). Common range: 15% to 30%.

3. Palm Oil (NaOH SAP 0.142)

Adds hardness and a stable, creamy lather. If you use it, choose RSPO-certified sustainable palm. Many soap makers leave it out and use butters, lard or tallow instead. Common range: 15% to 30%.

4. Castor Oil (NaOH SAP 0.128)

Boosts and stabilises lather. Too much makes a soft, sticky bar. Common range: 5% to 10%.

5. Shea Butter (NaOH SAP 0.128)

Adds hardness and a silky, conditioning feel. Common range: 5% to 15%.

6. Cocoa Butter (NaOH SAP 0.138)

Makes a very hard bar. High amounts can make soap brittle or prone to cracking. Common range: 5% to 15%.

7. Lard (NaOH SAP 0.141)

Traditional and affordable. Gives a hard, mild bar with creamy, stable lather. Common range: 20% to 40%, and often higher in traditional recipes.

8. Beef Tallow (NaOH SAP 0.143)

Similar to lard: a hard, long-lasting, mild bar with creamy lather. Common range: 20% to 40%, often higher.

9. Sweet Almond Oil (NaOH SAP 0.139)

A conditioning liquid oil. Mention it on your label and listing, because some customers have nut allergies. Common range: 5% to 15%.

10. Avocado Oil (NaOH SAP 0.133)

Rich and conditioning. Common range: 5% to 15%.

11. Rice Bran Oil (NaOH SAP 0.128)

Conditioning, and often a cheaper alternative to some of the olive oil in a recipe. Common range: 5% to 20%.

12. Babassu Oil (NaOH SAP 0.175)

Behaves much like coconut oil (hardness and big lather), and is often used as a coconut alternative. Common range: 15% to 30%.

Oils to Use With Care

Oils high in linoleic acid, such as sunflower, grapeseed and hemp, are lovely in small amounts but can shorten shelf life and make orange spots (rancidity) more likely when used heavily. Many soap makers keep them to around 15% of the recipe or less.

Put It Together

The percentages above are common starting points, not rules. Whatever oils you choose, the lye amount must be calculated for your exact recipe.

See SAP values for 46 oils →

Cost Your Oils Properly

Oil prices change, and so does your real cost per bar. LatherForge is our own soap business app, launching on 1 January 2027. It keeps your recipes, batches, ingredient stock and cost per bar in one place, so you are not juggling paper notes and spreadsheets. The first 300 people on the waitlist get 3 months free, with no card needed to start.

Join the LatherForge waitlist →

Information only. Always run your recipe through a soap calculator and follow lye safety guidance.

Frequently Asked Questions

What is the best oil for soap making?

There is no single best oil. Olive oil is the most versatile and the mildest, coconut oil gives hardness and lather, and castor oil boosts lather. Most good recipes combine three to five oils.

How much coconut oil should I use in soap?

Commonly 15% to 30% of the oils. More than about 30% can feel drying unless you raise the superfat, which is how salt bars use much higher amounts.

Can I make soap without palm oil?

Yes. Many soap makers replace palm with a mix of butters (shea, cocoa), lard or tallow, or extra coconut or babassu for hardness.

What is the SAP value of olive oil?

Olive oil has a NaOH SAP value of about 0.135 (KOH about 0.190). Use a soap calculator rather than working it out by hand.

Free Tool

Free Soap Calculator

Calculate exact NaOH or KOH amounts for any recipe. No signup required.

Use Free Calculator

More from the Blog

Soap Making Basics

What Is Lather in Soap? What Makes Soap Bubble (and What Kills It)

5 min read

Soap Making Basics

How Long Does Soap Need to Cure? Cure Times for Every Type of Soap

6 min read