Goat Milk Soap Recipe

Cold process goat milk soap recipe using frozen goat milk in place of water, with shea butter and sweet almond oil.

IntermediateCold process5% superfatCure: 5 weeks

Why this recipe works

Goat milk gives a creamy lather and a soft, pale bar. Freezing the milk stops the lye from scorching the sugars, which would turn the soap orange and smell of ammonia.

Ingredients

Ingredient%GramsOunces
Olive Oil40%400 g12.8 oz
Coconut Oil (76°)25%250 g8 oz
Shea Butter15%150 g4.8 oz
Sweet Almond Oil15%150 g4.8 oz
Castor Oil5%50 g1.6 oz
Sodium hydroxide (NaOH)138.9 g4.4 oz
Goat milk, frozen into cubes (use the same weight as the water shown)277.8 g8.9 oz

Amounts are for 1000 g (or 32 oz) of oils, a batch of about 1417 g before curing. Water is 2:1 to lye by weight.

Resize in the soap calculator

⚠️ Lye safety: read before you start

  • Lye (NaOH) is caustic. Wear splash-proof goggles, chemical-resistant gloves and long sleeves.
  • Work in a well-ventilated room and keep children and pets away.
  • Use heat- and lye-safe containers (stainless steel or sturdy polypropylene). Never use aluminium.
  • Always add lye slowly to the measured liquid, never liquid to lye. Do not breathe the fumes.
  • Fresh soap batter and newly made bars are also caustic. Wear gloves when pouring, unmoulding and cutting.
  • Always run a recipe through a lye calculator before making it, especially if you change an oil.

First aid: on skin, rinse immediately with plenty of running water. In the eyes, rinse with water for at least 15 minutes and get medical help. Do not put vinegar on skin or eyes.

Method

  1. Put on gloves and eye protection and clear the work area.
  2. Weigh the water (or frozen liquid) into a heat-safe jug. Weigh the lye separately, then slowly add the lye to the water, never the other way round. Stir until dissolved and leave to cool.
  3. Weigh and melt the hard oils and butters, then add the liquid oils.
  4. When the oils and lye solution are both around 35–45°C (unless the tips say otherwise), pour the lye solution into the oils.
  5. Stick blend in short bursts until light trace (like thin custard). Stir in fragrance, colour and any additives.
  6. Pour into the mould, cover and leave for 24–48 hours.
  7. Unmould, cut into bars and cure on a rack in a dry, airy place.

Tips

  • Add the lye to the frozen milk slowly, a spoonful at a time, with the jug sitting in an ice bath. Keep stirring until all the lye has dissolved; milk is opaque, so melted cubes do not prove it. Do not carry on with undissolved granules.
  • Keep the milk and lye mixture cool to stop it scorching, but keep the oils fully melted and fluid; do not let them go cloudy. Do not insulate; put the mould in the fridge or freezer for 24 hours to prevent overheating.
  • A slight ammonia-like smell while mixing is normal and fades during cure. Work with good ventilation and do not lean over the jug.

Selling your soap?

LatherForge works out your cost per bar and pricing, builds compliant labels and keeps your batch records. Launching January 2027.

Get early access

More soap recipes

Easy Beginner Soap

Beginner · 5% superfat

Castile Soap (100% Olive Oil)

Beginner · 5% superfat

Bastille Soap

Beginner · 5% superfat

Launching January 2027

Keep your recipes and batches in one place

LatherForge is our app for soap makers. It keeps your recipes, batches, stock and cost per bar in one place. Leave your email and we will tell you when it opens. The first 300 sign-ups get 3 months free, with no card needed to start.

The 3 months free is limited to the first 300 sign-ups. No card is needed to start; to keep using LatherForge after the 3 months, you add payment details and choose a plan. Nothing is charged unless you do. No spam. No selling your data. Just a single email when we launch. See our privacy policy.

Related guides