Oatmeal Soap Recipe
A gentle, palm-free oatmeal cold process soap recipe with colloidal oats, rice bran oil, olive oil and shea butter.
Why this recipe works
Rice bran and olive oil give a mild, silky base, shea butter adds hardness, and coconut and castor keep the lather creamy. Finely ground colloidal oats add a soft feel and a speckled, natural look.
Ingredients
| Ingredient | % | Grams | Ounces |
|---|---|---|---|
| Rice Bran Oil | 30% | 300 g | 9.6 oz |
| Olive Oil | 30% | 300 g | 9.6 oz |
| Coconut Oil (76°) | 20% | 200 g | 6.4 oz |
| Shea Butter | 15% | 150 g | 4.8 oz |
| Castor Oil | 5% | 50 g | 1.6 oz |
| Sodium hydroxide (NaOH) | 134 g | 4.3 oz | |
| Distilled water | 268.1 g | 8.6 oz |
Amounts are for 1000 g (or 32 oz) of oils, a batch of about 1402 g before curing. Water is 2:1 to lye by weight.
- Colloidal oatmeal: 10 g per 1000 g oils, mixed into about 20 g of the measured olive oil (not extra oil) and stirred in at light trace
⚠️ Lye safety: read before you start
- Lye (NaOH) is caustic. Wear splash-proof goggles, chemical-resistant gloves and long sleeves.
- Work in a well-ventilated room and keep children and pets away.
- Use heat- and lye-safe containers (stainless steel or sturdy polypropylene). Never use aluminium.
- Always add lye slowly to the measured liquid, never liquid to lye. Do not breathe the fumes.
- Fresh soap batter and newly made bars are also caustic. Wear gloves when pouring, unmoulding and cutting.
- Always run a recipe through a lye calculator before making it, especially if you change an oil.
First aid: on skin, rinse immediately with plenty of running water. In the eyes, rinse with water for at least 15 minutes and get medical help. Do not put vinegar on skin or eyes.
Method
- Put on gloves and eye protection and clear the work area.
- Weigh the water (or frozen liquid) into a heat-safe jug. Weigh the lye separately, then slowly add the lye to the water, never the other way round. Stir until dissolved and leave to cool.
- Weigh and melt the hard oils and butters, then add the liquid oils.
- When the oils and lye solution are both around 35–45°C (unless the tips say otherwise), pour the lye solution into the oils.
- Stick blend in short bursts until light trace (like thin custard). Stir in fragrance, colour and any additives.
- Pour into the mould, cover and leave for 24–48 hours.
- Unmould, cut into bars and cure on a rack in a dry, airy place.
Tips
- Keep the oils and lye solution at about 35–40°C, with the oils still fully melted. Blend in short bursts to light trace, then stir in the oat mixture.
- Use colloidal or very finely ground, sifted oats. Coarse oats feel scratchy and can go soggy in the bar.
- Unmould after 24–48 hours once the bar is firm, then cure for at least 6 weeks with good airflow.
Selling your soap?
LatherForge works out your cost per bar and pricing, builds compliant labels and keeps your batch records. Launching January 2027.
Get early access