Salt Bar Soap Recipe
A high coconut oil salt bar soap recipe with a 20% superfat and fine sea salt. Hard, long-lasting and bubbly.
Why this recipe works
Salt normally kills lather, so salt bars use lots of coconut oil to stay bubbly. The high 20% superfat keeps all that coconut oil from being drying.
Ingredients
| Ingredient | % | Grams | Ounces |
|---|---|---|---|
| Coconut Oil (76°) | 80% | 800 g | 25.6 oz |
| Olive Oil | 15% | 150 g | 4.8 oz |
| Castor Oil | 5% | 50 g | 1.6 oz |
| Sodium hydroxide (NaOH) | 138.4 g | 4.4 oz | |
| Distilled water | 276.9 g | 8.9 oz |
Amounts are for 1000 g (or 32 oz) of oils, a batch of about 1415 g before curing. Water is 2:1 to lye by weight.
- Fine sea salt: 50% of oil weight (500 g per 1000 g oils), stirred in at light trace. Up to 100% is a variation that changes handling and lather. Avoid coarse sharp crystals, Dead Sea salt and Epsom salt
⚠️ Lye safety: read before you start
- Lye (NaOH) is caustic. Wear splash-proof goggles, chemical-resistant gloves and long sleeves.
- Work in a well-ventilated room and keep children and pets away.
- Use heat- and lye-safe containers (stainless steel or sturdy polypropylene). Never use aluminium.
- Always add lye slowly to the measured liquid, never liquid to lye. Do not breathe the fumes.
- Fresh soap batter and newly made bars are also caustic. Wear gloves when pouring, unmoulding and cutting.
- Always run a recipe through a lye calculator before making it, especially if you change an oil.
First aid: on skin, rinse immediately with plenty of running water. In the eyes, rinse with water for at least 15 minutes and get medical help. Do not put vinegar on skin or eyes.
Method
- Put on gloves and eye protection and clear the work area.
- Weigh the water (or frozen liquid) into a heat-safe jug. Weigh the lye separately, then slowly add the lye to the water, never the other way round. Stir until dissolved and leave to cool.
- Weigh and melt the hard oils and butters, then add the liquid oils.
- When the oils and lye solution are both around 35–45°C (unless the tips say otherwise), pour the lye solution into the oils.
- Stick blend in short bursts until light trace (like thin custard). Stir in fragrance, colour and any additives.
- Pour into the mould, cover and leave for 24–48 hours.
- Unmould, cut into bars and cure on a rack in a dry, airy place.
Tips
- Individual cavity moulds are easiest. For a loaf, check often and cut as soon as it holds its shape, before it turns brittle; timing varies. Wear gloves and eye protection when handling fresh soap.
- Cure for at least 8 weeks; salt bars keep improving for months.
Selling your soap?
LatherForge works out your cost per bar and pricing, builds compliant labels and keeps your batch records. Launching January 2027.
Get early access