Beef Tallow Soap Recipe
A classic beef tallow soap recipe for a hard, long-lasting, mild bar with a creamy lather.
Why this recipe works
Tallow makes one of the hardest, longest-lasting bars. It is a popular choice for makers who want a traditional, palm-free soap.
Ingredients
| Ingredient | % | Grams | Ounces |
|---|---|---|---|
| Tallow (Beef) | 60% | 600 g | 19.2 oz |
| Olive Oil | 20% | 200 g | 6.4 oz |
| Coconut Oil (76°) | 15% | 150 g | 4.8 oz |
| Castor Oil | 5% | 50 g | 1.6 oz |
| Sodium hydroxide (NaOH) | 139.3 g | 4.5 oz | |
| Distilled water | 278.6 g | 8.9 oz |
Amounts are for 1000 g (or 32 oz) of oils, a batch of about 1418 g before curing. Water is 2:1 to lye by weight.
⚠️ Lye safety: read before you start
- Lye (NaOH) is caustic. Wear splash-proof goggles, chemical-resistant gloves and long sleeves.
- Work in a well-ventilated room and keep children and pets away.
- Use heat- and lye-safe containers (stainless steel or sturdy polypropylene). Never use aluminium.
- Always add lye slowly to the measured liquid, never liquid to lye. Do not breathe the fumes.
- Fresh soap batter and newly made bars are also caustic. Wear gloves when pouring, unmoulding and cutting.
- Always run a recipe through a lye calculator before making it, especially if you change an oil.
First aid: on skin, rinse immediately with plenty of running water. In the eyes, rinse with water for at least 15 minutes and get medical help. Do not put vinegar on skin or eyes.
Method
- Put on gloves and eye protection and clear the work area.
- Weigh the water (or frozen liquid) into a heat-safe jug. Weigh the lye separately, then slowly add the lye to the water, never the other way round. Stir until dissolved and leave to cool.
- Weigh and melt the hard oils and butters, then add the liquid oils.
- When the oils and lye solution are both around 35–45°C (unless the tips say otherwise), pour the lye solution into the oils.
- Stick blend in short bursts until light trace (like thin custard). Stir in fragrance, colour and any additives.
- Pour into the mould, cover and leave for 24–48 hours.
- Unmould, cut into bars and cure on a rack in a dry, airy place.
Tips
- Melt the tallow completely and keep the oils fully fluid before adding the lye. About 40°C usually works, but go by the oils, not the thermometer: cloudy or setting fat can look like false trace.
- Tallow can trace quickly; keep additives simple for your first batch.
Selling your soap?
LatherForge works out your cost per bar and pricing, builds compliant labels and keeps your batch records. Launching January 2027.
Get early access